Nucleonic density detector FracSENS LB 6770

The FracSENS LB 6770 directly connects to the customer control system. A transmitter unit is not needed at all. The count rate measured can be used to calculate PPA, PPG or SGU either in low pressure or in high pressure applications.

With outer dimensions of 2.2 x 11.2 inches the detector is much smaller than any other fracturing densitometer and due to this compact design and its internal structure the detector is extremely resistant to vibration and mechanical shock, which has been proven successfully in excessive tests (up to 500g) and in real applications.

The scintillation technology ensures high sensitivity for gamma radiation and allows drastic reduction of source activity compared to conventional Ion Chamber detectors. A maximum of 20mCi is what we have proven sufficient for all fracturing applications.

A high responsiveness of the detector output signal enables an extremely fast measurement, possible output options are 4…20mA, 0…10V or pulses. Modbus communication is available to access parameters and settings.


Format Größe
Solution for Oil and Gas Production Level, Multiphase Level and Density Measurement de, en PDF 4.24 MB
Format Größe
FracSENS LB6770 Densitometer de, en PDF 598.15 KB
Format Größe
LB 6770 de, en PDF 1.15 MB
Software Tool
Format Größe
LB 475 DuoSeries Measuring Unit Software Update Version 1.4.0 de, en ZIP 12.13 MB
LB 6770 PC Application de, en ZIP 2.97 MB
LB 6770 Update Software Version 1.1.1 de, en ZIP 321.85 KB