English | PDF | 662.4 KBDownload now
The scintillation technology ensures high sensitivity for gamma radiation and allows drastic reduction of source activity compared to conventional ion chamber detectors. A maximum of 20mCi is what we have proven sufficient for all fracturing applications.
A high responsiveness of the detector output signal enables an extremely fast measurement, possible output options are 4-20mA, 0-10V or pulses. Modbus communication is available to access parameters and settings.
The longterm stability of a detector is extremely important for a consistently high quality measurement performance and accuracy during the entire operation. Longterm drifts of detector sensitivity can be caused by temperature changes and aging. If they go unnoticed and are not compensated, they can cause a considerable loss in production yields and product quality suffers.
Especially in low radiation conditions, our highly sensitive detectors improve the signal to noise ratio, what is resulting in superior measurement performance compared to competing systems. Source replacement is costly, time consuming, and does not work towards a reduction in overall site source activity.
The detector FracSENS LB 6770 is not explosion protected and is not designed for hazardous environments
|Housing material||Stainless steel ISO 1.4301 / AISI 304 (others upon request)|
Approx. 3 kg
|Operating temperature||-40 ... +60 °C (-40 ... +140 °F)|
Ø x length [mm] and material
40 x 50 (NaI/Tl)
Typical sensitivity per µSv/h (Cs-137)
Use of an outdated browser
In order to make your Internet experience safer and as agreeable as possible, you should update your browser here to a new version. The update is free. If you are using this PC at work, you should contact your IT administrator. Please note that due to the outdated browser this website may not display correctly.
Click here to ignore this message.
Berthold Technologies GmbH & Co.KG
Calmbacher Str. 22
75323 Bad Wildbad
Tel.: (+49) 7081 177 0
Fax: (+49) 7081 177 100