Lumat³ LB 9508 Brochure
Brochure of the Lumat³ LB 9508 Tube Luminometer
PDF | 1.4 MB
Download nowThe Lumat³ is a tube luminometer that uses state-of-the-art technology based on more than 40 years of experience engineering and designing luminometers. The luminometer supports all basic luminescence technologies including:
Thanks to a stringent selection of photomultipliers working in photon counting mode and more than 40 years of experience building luminometers, the Lumat³ offers excellent luminescence sensitivity: less than 5 amol ATP/tube for the standard version or as low as 1 amol ATP/tube for the High sensitivity version can be reliably detected.
The Lumat³ can be equipped with up to 2 JET injectors with variable volumes. The ultra-fast injection speed of JET-injectors eliminates any delay between injection and measurement and is critical to measure fast reactions, e.g. for flash luminescence measurements.
Berthold Technologies' JET injectors use Teflon bellows for accurate and fast injections and guarantee most efficient mixing as well as extreme longevity.
The measurement of individual samples one after the other can be time-consuming. The Lumat³ has a turret mechanism that makes this job easier and increases your throughput. Thanks to its motor-driven rotating chamber for two tubes (one for measuring and one for loading and unloading), you can prepare and insert the next sample while the previous one is still measuring, and quickly switch from one to the other, making the measurement of multiple samples convenient and fast.
Berthold Technologies’ ICE software is a wizard-driven software that is very simple to use. There are several versions of ICE sotware available:
Detectors | Low-noise photomultiplier tube in single photon counting mode |
---|---|
Detection technologies | Luminescence |
Measurement modes | Endpoint, Kinetics |
Spectral range luminescence | 340-630 nm |
Injectors | Up to 2 JET injectors with frictionless operation |
---|---|
Injector volume | 10-100 µL or 25-300 µL |
Injector accuracy | Better than 2% across the entire volume range |
Injector precision | Better than 2% across the entire volume range |
Tube formats | Luminescene tubes, 12 x 47 mm Luminescene tubes, 12 x 55 mm Luminescene tubes, 12 x 75 mm Microcentrifuge tubes, 1, 1.5 and 2 mL |
---|
Luminescence sensitivity | Standard model: <5 amol ATP/tube High-sensitivity model: <1 amol ATP/tube |
---|---|
Dynamic range | >6 orders of magnitude |
Interface | Windows software, connected to computer by USB |
---|---|
Operating system | Windows 7 or better |
Available software packages |
|
Regulations | CE |
---|---|
Power Supply | 110-240 V, 50/60 Hz, 30 VA |
Temperature tolerance | Storage: 0-40° C Operation: 15-35° C |
Humidity tolerance | 10-85% non-condensing |
Dimensions (W x D x H) | 240 x 280 x 220 mm |
Weight | 4 kg |
Brochure of the Lumat³ LB 9508 Tube Luminometer
PDF | 1.4 MB
Download now
Use of an outdated browser
In order to make your Internet experience safer and as agreeable as possible, you should update your browser here to a new version.
The update is free. If you are using this PC at work, you should contact your IT administrator.
Please note that due to the outdated browser this website may not display correctly.
Click here to ignore this message.
Legal
Berthold Technologies GmbH & Co.KG
Calmbacher Str. 22
75323 Bad Wildbad
Tel.: (+49) 7081 177 0
Fax: (+49) 7081 177 100
info@berthold.com