The Data Logger LB 9000 is a universal data acquisition system, which could be used for a variety of measuring applications in all scopes of radiation protection measurement techniques.
The Data Logger LB 9000 with its PC software is a universal data acquisition system for a variety of detector systems in radiation protection. All kinds of different probes, sensors and peripheral devices can be connected.
The Data Logger has a modular structure so that it can be set up and retrofitted depending on the application. Intelligent modules are used to which the detectorsa and sensors are connected:
If necessary the modules can be used in a multiple way. Up to 10 slots are available so that you can configure a large-scale system with up to 50 virtual measuring channels combined with 20 analog outputs and 70 digital outputs.
The system can be upgraded to max. 15 boards by using an additional rack.
The Data Logger features the latest state of art technology and a technically mature software system that can be configured by the user. It takes over the complete control of all modules, calculation and integral calculation and the graphical presentation on the screen.
All measured values, different integral values and exceeding or not reaching limit values can be monitored and output depending on the user´s requirements.
The Microsoft™ based PC software has a very userfriendly graphical interface. There are various service functions for periodical testing: Background measurement, determination of calibration factors, plateau measurement and determination of pseudo-coincidence factors.
19"-rack, euro board, desktop housing or rack mounting device
Passive backplane with 11 slots for 6 different plug-in boards (modules). Depending on the application one or more of these boards can be mounted.
Communication between the modules via CAN-bus, intelligent data acquisition module with µ-controller
Wide range power supply EC50C (93-264VAC)
Industrial PC with graphical display (12'' TFT-monitor with touch screen), colour display
Operating System: Windows® XP, Windows® 7; keyboard with trackball
1 x USB port, 1 x Ethernet, 1 x parallel (printer),
1 x mouse connection, 1 x keyboard, 2 x RS 232 serial
Multi I/O modules
4 counting inputs
2 current inputs (0/4-20 mA)
2 current outputs (0/4-20 mA)
4 digital inputs
4 control voltages for probe high voltage 0-5 V
connection via phoenix-terminal-block (32 pin connector)
Multi I/O modules
(LB 39417 (-01))
see LB 39417
connection via phoenix-terminal-block (48 pin connector)
Pseudo-coincidence board α, β, γ-counter BNC inputs for norm pulses
2 independent HV-outputs (up to 4 kV)
Pseudo-coincidence board α, β, γ- counter BNC inputs for norm pulses
2 independent HV-outputs (up to 1.4 kV)
1 HV-supply up to 4 kV (12 bit resolution)
preamplifier for GM, proportional counter tubes and scintillation detectors
Software controlled main-amplifier (8 bit)
2 x freely selectable ROI´s
1 integral discriminator
3 internal counting channels
2 HV-outputs (1 x direct and 1 x over voltage Tripler stage HVx3)
1 BNC counter input and 1 BNC counter output
Adds another dual SCA to the DAQ module using the same detector input
Allows to set 4 ROI´s on the spectrum
8 independent current outputs (0/4-20 mA)
linear or logarithmic output area selectable
(embedded watchdog function)
16-fold Relay board
16 potential-free, freely programmable relay-outputs with double changer
External 8-fold Relay board
8 freely programmable relay-outputs with double changer
additional 24 V power supply required
Low Voltage Board(LB 39416)
4 x Tuchel-connectors with 5V and ± 15 V each
BERTHOLD TECHNOLOGIESGmbH & Co. KG
Calmbacher Str. 2275323 Bad WildbadGermany
+49 7081 177-0+49 7081 177-100info@Berthold.com