Automatically sets the correct cell-specific parameters.
Standard finger tight fittings for easy system integration.
Large sample area
Ensures maximum detection.
Types of measurement cells
Solid scintillation cells
The solid scintillator cells use a very thin Teflon or Halar tubing filled with fine scintillator grains. These cells are designed to withstand back pressure from viscous samples and flow rate. Solid scintillation cells are available either untreated (YG-U type) or surface treated (YG-S type) to minimize memory effects by sticky analytes.
- Exceptional yield
- Chemically inert
Liquid Scintillation Cells
Designed to be used when a liquid scintillator is added externally using a scintillation pump. Liquid scintillation cells are available for all applications including standard HPLC, LC/MS microbore and UHPLC.
- Optimized peak shape
- Best signal-to-noise ratio
- No stickiness issues
Microbore cells for UPLC™/UHPLC
Designed to meet the demands of microbore HPLC by having a minimized cell volume and reduced dead volume.
- Excellent peak shape
- Higher peak resolution
The BGO-X cell consists of a 40 mm BGO crystal that is specifically designed for analyzing gamma isotopes. There is a selection of different cartridges is available to cover a wide range of volumes.
- High efficiency detection even for high energy gamma isotopes
Low energy Gamma Cell
Specific proprietary cell design optimized for low energy gamma isotopes like 125I.
- High efficiency detection
- Very low background signals