State of the art measurement technology

Microwave transmission method

Graphic online moisture system installed on the wood chips conveyor

The microwave measurement system generates microwaves which interact with the water molecules due to the high dielectric constant. This interaction causes a decrease of the microwave energy, which can be detected as phase shift and attenuation. Since the phase shift and attenuation changes are directly proportional to the water content in the product, the concentration or dry content in the medium can be determined with high accuracy.

  • Multifrequency technology for dynamic plausibility control of the raw signal
  • Easy installation on existing conveyor belts or measuring shafts
  • Signal quality management for the processing of measurement data
  • Height and density compensation of non-homogeneous materials

Radiometric moisture measurement

The measuring system generates an electromagnetic microwave field which interacts with water molecules due to their high dielectric constant. This interaction causes a weakening or change of the field, which can be detected as frequency shift and attenuation. Since the changes are directly proportional to the water content, the moisture or dry content of the product can be determined with high accuracy.

  • Representative measured values due to large measurement volume
  • Not influenced by temperature, conductivity, pressure, pH value etc.
  • Proven measurement technology with achievable accuracy of ±0.1 % moisture
  • Various sensors for measurements in or through the vessel

Technology Highlights

Customer benefits

  • Cost-optimized production through real-time measurement
  • Maintenance-free
  • Superior measurement technology „Made in Germany”


State of the art technology

  • Easy installation, even on existing containers, conveyors, silos, tanks or measuring shafts
  • Extremely representative, accurate and reliable measurement without recalibration
  • Measurement of the entire material cross section

Online moisture measurement on bulk materials

The MicroPolar measures the moisture content of a wide variety of bulk solids online. The measurement takes place on the conveyor belt, bunker, silo, or on a shaft. The microwave transmission technology provides a noncontact measurement of the entire material cross-section. This results in an accurate and representative online measurement for quality assurance and process optimization.
Typical areas of application for all kind of bulk materials are found in mining, power plants, coking plants, chemistry, building materials, wood and paper industry.

Further information about our microwave transmission measurement

LB 567/568

Moisture measurement in storage and weighing containers

This radiometric measuring technology measures the material moisture in storage and weighing containers. The system measures a large material volume (up to 1 m diameter), making the measurement representative, rather than a surface measurement. The moisture is measured from the outside of the vessel or through a modified wall section.
The measurement setup is extremely robust and has already proven itself in numerous difficult applications such as moisture measurement of coke, sinter, sand, gravel, calcareous sandstone, although it is not explosion proof rated. Once installed and calibrated, no further recalibration or maintenance is required. 
For further information about our radiometric moisture measurement

LB 350


2 Results


Do you need help selecting the moisture measurement system that best fits your industry and application?

Contact our worldwide network of engineers and service technicians for expert advice and support from initial inquiry through installation and eventual source reclamation. 

Contact us