English | PDF | 521.0 KBDownload now
Berthold‘s measuring systems are successfully in use at Wienerberger, specifically on the clay conveyor belt for Poroton®. Horn antennas are used under and above the conveyor belt to transmit a microwave signal. When retrofitting existing conveyor systems, spiral antennas can also be used if necessary. Contact us and see for yourself!
Berthold‘s measuring systems are already successfully in use at, especially on the clay conveyor belt for Poroton®. Horn antennas are used under and above the conveyor belt. When retrofitting existing conveyor systems, spiral antennas can also be used if necessary. Contact us and see for yourself! convince yourself!
The microwave measuring system uses the special dielectric property of water. The measuring system generates microwaves that interact with the water molecules. This interaction causes an attenuation of the microwave energy, which can be detected as phase shift and attenuation. Since the phase shift and attenuation are directly proportional to the water content in the product, the concentration the medium can be determined with high accuracy.
Berthold‘s superior multi-frequency technology ensures very stable and reliable measurements that are unaffected by interfering reflections or resonances. The microwave power of a measuring system is so low (max. 10 mW) that the material to be measured is neither heated nor changed in any way.
Use of an outdated browser
In order to make your Internet experience safer and as agreeable as possible, you should update your browser here to a new version. The update is free. If you are using this PC at work, you should contact your IT administrator. Please note that due to the outdated browser this website may not display correctly.
Click here to ignore this message.
Berthold Technologies GmbH & Co.KG
Calmbacher Str. 22
75323 Bad Wildbad
Tel.: (+49) 7081 177 0
Fax: (+49) 7081 177 100