English | PDF | 470.9 KBDownload now
Microwave measurement is nonintrusive; there is no sensor that comes into contact with the product to be measured, which limits maintenance and avoids special cleaning. The measurement is not influenced by the colour or inhomogeneity of the measured product. Furthermore, the measurement is carried out on the entire product. In addition, the multi-frequency technique enhance the stability and representativeness of the result. The Micro-Polar system is easy to install. The processing unit has a large display and a user-friendly interface. Automatic calibration can be carried out on site.
The microwaves pass through the product to be measured, causing rotation of the free water molecules. They have excellent dielectric properties. This rotation causes the microwaves to slow down (phase shift) and decrease in amplitude (attenuation), resulting in a very accurate measurement of the water content. Thanks to the multi-frequency technique used by Berthold, the measurements are highly reliable and stable and are not affected by reflectance or resonance. The integrated reference line provides excellent compensation of the influence of environmental parameters. As the device generates very low power microwaves (about 0.1 mW), the measured product does not undergo any temperature rise or changes. The radio licenses for the system have been approved by the FCC, IC and ETSI.
Use of an outdated browser
In order to make your Internet experience safer and as agreeable as possible, you should update your browser here to a new version. The update is free. If you are using this PC at work, you should contact your IT administrator. Please note that due to the outdated browser this website may not display correctly.
Click here to ignore this message.
Berthold Technologies GmbH & Co.KG
Calmbacher Str. 22
75323 Bad Wildbad
Tel.: (+49) 7081 177 0
Fax: (+49) 7081 177 100