KTE (Kerntechnische Entsorgung Karlsruhe) is a company that bundles all dismantling activities regarding the decommissioned nuclear research and prototype plants and the necessary disposal activities at the Karlsruhe/KIT Campus North site. Marvin Haas, Radiation Protection Instrumentation specialist at KTE, is telling us more about the project from a customer perspective.

What were the requirements of the project?

The main requirements were:

  1. Simultaneous measurement of alpha and beta/gamma radioactive contamination.
  2. Lowest limit of detection of 0.02 Bq/cm2 for alpha and 0.2 Bq/cm2 for beta radiation.
  3. A detector surface of at least 14400 cm2.
  4. The system must be able to measure pieces of clothing of 180 x 80 cm.
  5. Easy handling.
  6. Pre-fitting of the garments.
  7. Automated operation.

And, of course, the system had to fit the room that was assigned for this task.

Figure 1: one of the measuring units with pieces of clothing going in (left) and out (right).

Download the full customer story to learn more about the solution offered by Berthold and how it fulfilled the requirements of this project!

 

Download full story

Do you need a tailor-made radiation monitoring system for your project?

The engineers and service technicians of Berthold Technologies are wherever they are needed. 

We are here for you worldwide!

 

Berthold's Custom Solutions